Max-Tek Superabrasive Machines
AGC-100 Automatic Grinding Center
STC-200 Superabrasive Turning Center
STC-300 Superabrasive Turning Center
STC-300 ATC Superabrasive Turning Center
STC-400 Superabrasive Turning Center
HGC-500 Horizontal Grinding Center
HGC-800 Horizontal Grinding Center
MAX-510 Superabrasive Contouring Machine
MAX-710 Superabrasive Contouring Machine
About CBN Grinding
News Archives
About Us
Fax: 860-372-4904
or Contact Us Via Email

STC-400 Superabrasive Turning Center

STC-400 Impeller MachineThe STC-400 is specifically out-fitted with hydraulic part holding and a tailstock for the machining of difficult interrupted cut components such as centrifugal pump and compressor impellers up to 25.0" in diameter.

The three axes (X/Z/C) STC-400 utilizes a substantial high tensile Meehanite base to provide superior rigidity and vibration dampening for efficient high speed superabrasive machining. The STC-400 has been designed for operator and maintenance efficiency

The linear guide ways have no contact with grinding swarf which drops to the bottom of the machine for transfer to the sump. The grinding wheel is easily accessible enabling safe, simple wheel changes and the spindle belt can be changed from a convenient access panel on the side of the machine. The STC-400 is an efficient 99 sq. ft. footprint yielding tremendous productivity per square foot of floor space.

Using a standard 50 HP, 12,000 RPM belt driven grinding spindle and a 10" hydraulic three jaw chuck with a 3,500 RPM, 11 HP work spindle motor, the STC-400 is capable of heavy material removal. X axis feedback is provided by a Heidenhain scale and a Fanuc based touch screen operator panel with over-ride switches is standard.

STC-400 Series Specifications
Travel: Max. Swing 21.0"
X-Axis Travel 10.2"
Z-Axis Travel 25.9"
Work Spindle: Spindle Center Height From Floor 38.9" +/-
Spindle Nose A2-8
Max Spindle HP and RPM 15 HP, 3500 RPM
Power Chuck Size 10.0"
Power Chucking System Hydraulic or Pneumatic
Axis Specifications: X and Z-Axis Slide Ways Linear Guide
X-Axis Rapid Traverse 24M/Minute
Z-Axis Rapid Traverse 30M/Minute
Linear Positioning +/- .0002"/12 Inches
Linear Repeatability +/- .0001"
General Specifications: Slideways Lubrication System Automatic
Spindle HP and RPM 53HP, Up to 9,000 RPM
Grinding Wheels Up to 16.0" diameter
Wheel Mount Up to 5.0" Hub
Tailstock Hydraulic
Tailstock Max Stroke 23.6"
Tailstock Inside Taper MT5
Machine Footprint 128" Length, 85" Deep, 90" High
Machine Weight 16,500 Lbs. (7,500 KG)
Print  Print This Page Top  Top of Page
Web Solutions Connecticut CT Website Design & Development Company